Biking on the highway sounds really cool. But, what’s not so cool is when you get stuck on the roadside with a flat tire. And, losing some air each time you remove your bike pump is frustrating.
The chances that you have faced this issue are quite high. So if that’s what brought you’re here, congratulations – you have landed in the right place!
Yes, you can learn how to remove bike pump without losing air.
Read on to unfold the steps if you do not want to fall into the situation above.
Why Does Your Bike Tire Lose Air When You Attach the Bike Pump?
Your bike tire, especially the mountain bike tubeless tire, will lose some air when removing the valve. Note that the air escapes from a side of your bike valve – the Presta valve.
After you remove the bike pump, you might hear an explosive air noise, but do not fret as this is absolutely normal. Just do not touch the sensitive regions of the valve after you remove the bike pump.
Lastly, like any other bike part, the mountain bike tubeless tire setup will need regular servicing. Otherwise, the bike tire sealant will dry up, clogging the valves. Thus, remember to install it initially, as some tire combinations need an air compressor for bike tires.
Another reason for air leaking out through the valve is any busted deal. The bike tire sealant might bust in the bike’s inner tube. Even after you unscrew the tip, the valve needs to be sealed.
Before each ride, check the pressure. Do this step in between the rides to prevent losing air.
How to Stop Air Leakage From Your Tires After Pulling Out Your Bike Pump?
Trying unscrewing the bike head at the earliest if you do not want air to escape while removing the bike pump.
You can also freely grasp the valve using your thumb and index finger. Place everything (valve, head, and hose) in a straight line to attach coupling and twist freely.
Try not to exceed the highest pressure range of the bike tire. Correct pressure is essential for every bike out there. And, remember that your tire should be sturdy enough to avoid deflection.
How to Remove Bike Pump Without Losing Air
Below are some steps you could follow to remove the bike pump without having to lose air:
Step 1: Fasten Bike
Surely, you wouldn’t like your bike cascading down on you or shoot away when you pump air into your bike tire.
You need to either lie your bike on ground level or ensure its steadiness keeping your kickstand down. Brownie points if you have a friend with you! They hold your kickstand while you handle the tire.
Step 2: Examine the Tire
Had a flat tire? Now, you are guessing it’s due to your tire running out of air. While, in reality, this is not the reason.
Maybe a nail or any wear/tear might have caused your tire to lose air. And, if this is the actual scenario, pumping air would just be a waste of air, as well as your time.
Step 3: Prepare the Pump
One thing you should learn is that different tire valves need different pumps. Kudos if you have figured out a compatible one for you.
Now, it’s time to see if it’s working or not. For that, you need to ensure that you can hear the air sound. If you don’t, it means the pump has some issues that need addressing. Below are some examples/models of bike pumps:
- Floor pumps
- Digital pumps
- Hand pumps
- Foot pumps
- Mini pumps
- CO2 pumps
Step 4: Remove Its Tire Valve Covering
Removing the tire valve is not a piece of cake. The cap might be stubborn to move. Bikers generally keep equipment with them for such emergencies.
Turn your valve cap clockwise to remove it. This is not applicable for all valves, though. For example, if you use the Presta valve, give it a turn in an anti-clockwise direction. Remember to keep the cap safely once removed.
Step 5: Attach the Pump to Your Valve
Most of the bikers would know this step so well that they can do it while sleeping. The pump moves over your valve.
The pump’s nozzle is what covers its valve completely. When you start pumping, you will know if it is correct.
Step 6: Monitor Pressure Gauge
Perform some test pumps that monitor any tire pressure alterations. If no changes are seen, adjust the bike pump nozzle to secure it on the valve.
Repeat the process until you have ensured that this pump inflates your tire.
Step 7: Push the Pump Handle
Now that you have figured out how the pump works, push its handle down, and wait for it to bounce back. Repeat!
Feeling confident enough? Now that you have learned how to remove bike pump without losing air, the rest of the steps are easy!
Step 8: Pump to the Right Pressure
The tire’s surface will show the quantity of air it can hold. Now, you take a look at the tire gauge. Are you close? Is pumping getting harder?
Perhaps, the pump has stopped performing. This means you need the next step!
Step 9: Remove Pump
Once you have obtained your preferred tire pressure, flip a switch on the pump top. While the valve stays covered, secure the nut, locking onto your valve.
Even if you lose air, it will be minimized.
You must keep in mind to perform step 9 real quick. Other than that, all the steps can be gradually followed to know how to remove bike pump without losing air.
However, sometimes air loss is just inevitable. Just know what your bike needs – the valve type, operation of tire pump, and lastly, proper bike pump removal. Once you have all these figured out, you are good to go! Say goodbye to getting stuck on highways with a flat tire.